Contact Us
Service Areas
We currently provide our full suite of services
Including Vinyl Flake Epoxy, Custom Metallic Coatings, and Polished Concrete—in the following areas:
Request a Quote
Learn More From
Frequently Asked Questions
Polyurea floor coatings are typically installed in just one day, with curing completed 24 hours later.
Depending on traffic and maintenance, polyurea can last 10–30 years.
Yes, polyurea has a wide application temperature range compared to epoxy.
Clean regularly with a broom or vacuum, and mop with a gentle, pH-neutral cleaner.
When combined with a topcoat, it is usually designed with a textured, slip-resistant finish.
Yes, it can be applied over existing, properly prepared epoxy or concrete surfaces.
Garage floors, patios, pool decks, and industrial, high-traffic concrete surfaces.
While some, not all formulations shrink after curing, so it is important to verify this with the provider.
While more expensive than epoxy, its superior durability and longer lifespan make it a better long-term investment.
While some epoxy systems allow light traffic within 3–4 hours, most require 24 hours to cure before items can be replaced. Full, heavy use should be delayed for 72 hours.
Epoxy can be slippery when wet, but non-slip aggregate additives are frequently included in the topcoat to add traction.
Yes, but the concrete must be in good condition. Any grease, old paint, or sealers must be removed by diamond grinding or shot blasting for proper adhesion.
Apply between _ and _ Avoid applying in direct, intense sunlight or high humidity.
Sweep or vacuum regularly to remove abrasive dirt, and mop with a mild, non-abrasive cleaner.
Yes, epoxy emits fumes during application that can irritate the eyes and respiratory system; proper ventilation is required.
Minor cracks can be filled and repaired with epoxy filler or epoxy mortar during the preparation process.
Yes, provided the tiles are securely attached, clean, and prepped, though grinding is preferred.